ABIKOR BINZEL WH Series, Operating Instructions Manual

Page: 16 / 56

EN - 2
BAL.0022 • 2019-04-23
Alignment Jig
EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
operating instructions as become necessary due to misprints, inaccuracies or product enhancements. Such changes will,
however, be incorporated into subsequent editions of the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their respective owners/
manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national subsidiaries and partners
worldwide can be found on our website at www.binzel-abicor.com
1 Identification EN-3
1.1 Marking EN-3
2 Safety EN-3
2.1 Designated use EN-3
2.2 Obligations of the operator EN-3
2.3 Personal protective equipment (PPE) EN-3
2.4 Classification of the warnings EN-4
3 Product description EN-4
3.1 Technical data EN-4
3.2 Abbreviations EN-5
3.3 Nameplate EN-5
3.4 Signs and symbols used EN-5
4 Scope of delivery EN-5
4.1 Transport EN-6
4.2 Storage EN-6
5 Functional Description EN-6
5.1 Installing the alignment jig EN-7
5.1.1 Versions EN-11
6 Operation EN-12
6.1 Quick Control EN-12
6.1.1 Check the alignment. EN-12
6.2 Adjusting the Bending Angle EN-13
7 Maintenance and cleaning EN-14
7.1 Monthly EN-14
8 Troubleshooting EN-14
9 Disassembly EN-14
10 Disposal EN-14
10.1 Materials EN-14
10.2 Consumables EN-14
10.3 Packaging EN-14