xFUME
®
ADVANCED
6 Commissioning
EN
-
13
6.2 Mounting the current clamp
A current clamp is supplied with the device. A second current clamp is optionally available for the
connection of a second fume extraction torch.
6.3 Attaching the compressed air hose
1
Connect the current clamp cable to the current
clamp port.
2
Lay the current clamp over the cable assembly
and ensure that the red point on the current
clamp always points in the direction of the
current flow.
3
Switch the Auto/Manual switch to Auto on the
control panel.
1
Screw in the compressed air connection
including sealing ring.
2
Mount the compressed air hose on the
compressed air connector and connect to the
compressed air supply. Use a compressed air
hose with an inside diameter of a min. of 9 mm
and a max. length of 5 m.
From June 2021