Abicor Binzel TCS-FP, Operating Instructions Manual

Page: 53 / 92

TCS-FP 7 Operation
BAL.0713.0 • 2019-02-11
EN - 23
7 Operation
1 Switch on the robot control system.
2 Start the welding process.
3 Stop the welding process.
8 Decommissioning
1 Switch off the robot control.
9 Orange On “Y1 stroke cylinder up” output is active
Off “Y1 stroke cylinder up” output is not active
10 Orange On “Ext. Motor” output is active
Off “Ext. motor” output is not active
11 Orange On “OUT 5” output is active
Off “OUT 5” output is not active
12 Orange On “ERROR” output is active
Off “ERROR” output is not active
13 Green On “S5 rotary check” input is active
Off “S5 rotary check” input is not active
14 Green On “IN1” input is active
Off “IN1” input is not active
15 Green On “IN2” input is active
Off “IN2” input is not active
16 Green On “IN3” input is active
Off “IN3” input is not active
LED Color Status Description
Tab. 14 LED status module
NOTICE
• As the TCS-FP cleaning station is integrated into a welding system, the operating instructions of all welding components
must be observed during operation.
• Ensure that the TCS-FP is only ever operated when using the protective device supplied.
• Only qualified personnel are permitted to perform work on the device or system.
NOTICE
• As the TCS-FP cleaning station is integrated into a welding system, the process for putting it out of operation depends
on the robot control system.
• When decommissioning the system, ensure that the procedures for switching off the welding components are observed.