![background image](http://html1.mh-extra.com/html/abicor-binzel/sr-abitig-grip/sr-abitig-grip_operating-instructions-manual_451523024.webp)
EN - 12
BAL.0047 • 2018-09-11
8 Maintenance and cleaning
SR/ABITIG
®
GRIP
The parts of the
SR/ABITIG
®
GRIP
listed below are subject to wear and soiling. This is why
these parts must be subjected to regular maintenance and cleaning:
• Torch body
• Gas nozzle
• Tungsten electrodes
• Back cap
• Collet body
DANGER
Risk of burns
The welding torches reach very high temperatures during welding.
• Allow the welding torches to cool down.
• Wear the correct protective gloves.
NOTICE
• The maintenance intervals given are recommended values and refer to single-shift
operation.
• Maintenance and cleaning work may only be carried out by qualified personnel (in
Germany see TRBS 1203).
• Check coolant hoses, seals, and connections for damage and tightness. Replace as
necessary.
• Always wear your personal protective clothing when performing maintenance and
cleaning work.