DE - 10
BAL.0047 • 2018-09-11
5 Bedienungselemente Brennerhandgriff
SR/ABITIG
®
GRIP
5 Bedienungselemente Brennerhandgriff
Mit dem Standard Schweißbrenner ist die 2-Takt Betriebsart des Tasters möglich. Weitere
Betriebsarten und Handgriffmodule sind abhängig von der jeweiligen Stromquelle und müssen
separat bestellt werden.
5.1 Taster 2-Takt Funktion
1
Taster am Handgriff drücken und halten = Schweißstart.
2
Taster loslassen = Schweißende.
6 Betrieb
1
Schutzgasflasche öffnen und Schweißvorgang starten.
2
Lichtbogen nach dem Zünden ohne Längsbewegung über die zu verschweißenden
Werkstoffkanten halten, bis sich ein Schmelzbad bildet.
3
Den Brenner gleichmäßig über die gesamte Nahtlänge führen.
4
Schweißvorgang beenden.
5
Halten Sie den Brenner nach dem Abschalten noch einige Sekunden über der Endstelle.
Dabei erstarrt die Schmelze durch das nachströmende Gas, ohne das atmosphärische
Störungen entstehen.
HINWEIS
• Die Bedienung des
SR/ABITIG
®
GRIP
Schweißbrenners ist ausschließlich befähigten
Personen (in Deutschland siehe TRBS 1203) vorbehalten.
• Beachten Sie die Betriebsanleitungen der schweißtechnischen Komponenten
Schweißstromquelle und Schweißbrenner.
WARNUNG
Stromschlag
Ausrüstteile sind im Betrieb stromführend.
• Greifen Sie nicht in den Gefahrenbereich.