![background image](http://html1.mh-extra.com/html/abicor-binzel/sr-abitig-grip/sr-abitig-grip_operating-instructions-manual_451523020.webp)
EN - 8
BAL.0047 • 2018-09-11
4 Putting into operation
SR/ABITIG
®
GRIP
Equip the torch neck according to the following figure:
4.2 Shortening the tungsten electrode
The electrode type is set by EN ISO 6848. The maximum electrode length depends on the torch
type.
4.3 Connecting the cable assembly
1
Plug the hose assembly connection into the power source and secure it with a connection nut.
2
Properly mount the connections for water supply/return, shielding gas and control line plug.
1
Torch body
2
Gas nozzle
3
Tungsten electrodes
4
Back cap
5
Collet body
Fig. 1
Step 1-4
Schritt 1
Schritt 2-3
Schritt 4
1
5
3
4
2
NOTICE
• Instead of the collet body, you may also use a gas diffuser. Due to its design, it will
produce a laminar gas flow.
NOTICE
• The welding performance is affected by the selection of the tungsten electrode and by
wear. A smooth, groove-free sharpened end of the tungsten electrode has a positive effect
on the welding result.