EN - 4
2 Safety
MIG/MAG ROBO welding torch
1.1 CE marking
This device fulfils the requirements of the relevant EU directives.
2 Safety
The attached safety instructions must be observed.
This section provides key information on the safe operation of the product.
Please read it carefully and make sure that all users are familiar with its contents
before using the system for the first time.
• Please read these operating instructions carefully before using the system
for the first time. They provide you with all the information you need for
safe, fault-free operation.
• Read and observe the operating instructions before carrying out specific
work such as commissioning, operation, transport and maintenance.
2.1 Designated use
• The device described in these instructions may be used only for the
purpose and in the manner described in these instructions. In doing so,
observe the operating, maintenance and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are
not permitted.
Conformity is confirmed by the CE marking on the device.
