MFS-V2
14 Options
EN - 23
14.4.5 Service Menu
The navigation in the Service Menu takes place by means of the arrow and numeric keys and the
confirmation by pressing the Enter key.
Trigger
Display
Description
Service Menu:
=> Back
Measuring wheel
Versions
Press this key to go to the Service Menu.
Measuring wheel parameter:
Diam= 10.0
EncLin= 1024
The measuring wheel option is used to configure the optional wire actual
value encoder.
The roll diameter at the wire is usually 10.0 mm. The number of lines of the encoder is usually 1,024.
Versions:
V3.1 30.06.05
Ht-V1.0-100304
Sa= 103 P=0
In the Versions option, all software versions can be displayed.
E-Box hand-held terminal
Hand-held terminal
E-Box Standalone Program
1234567890123456
00000000100000000000
00000001100
These inputs show the statuses of the hardware inputs.
1234567890123456
0000000000000000
0000000000000000
The Outputs option allows the hardware outputs to be set (Up arrow) or reset
(Down arrow).
Motor current
Axis1: 0.960A
Axis2: 1.030A
The motor current option allows the current motor currents (average value) of
both drives to be displayed.
Axis 1 = Slave drive
Axis 2 = Master drive
Service
3
Summary of Contents for MFS-V2
