iSTM mini
1 Identification
BAL.0523.0 • 2019-10-17
EN - 3
1 Identification
The
iSTM mini
robot mount and its cable assembly are used in industry and the trade for connecting the torch neck to the
robot equipped with central media guidance.
These operating instructions describe the
iSTM mini
robot mount when used with the
ABIROB
®
W
welding torch neck and
the
ABIROB
®
G
welding torch neck, and also the
iSTM mini
with wire brake when used with the
ABIROB
®
W
and
ABIROB
®
G
welding torch neck. The
iSTM mini
must only be operated using original
ABICOR BINZEL
spare parts.
1.1 Marking
The iSTM mini robot mount in combination with the components shown in Figure 1 fulfill the requirements of the pertinent EU
directives.
This product fulfills the requirements that apply to the market to which it has been introduced. A corresponding marking has
been affixed to the product, if required.
2 Safety
The attached safety instructions must be observed.
2.1 Designated use
• The device described in these instructions may be used only for the purpose and in the manner described in these
instructions. When doing so, please observe the operating, maintenance and servicing conditions.
• Any other use is considered improper.
• Unauthorized modifications or changes to enhance the performance are not permitted.
1
Welding torch
ABIROB
®
G
2
Protective cap
3
Cover
4
iSTM mini
5
Cable assembly
6
Welding torch
ABIROB
®
W
7
Wire brake
1
1 Only for models with wire brake
Fig. 1
Overview
1
2
3 4
5
6
7
