iFEED 742
2 Safety
EN
-
7
2 Safety
This chapter provides basic safety instructions and warnings about residual hazards that should be kept in
mind in order to operate the product safely. Non-observance of the safety instructions may result in risks to
the life and health of personnel as well as cause environmental or material damage.
2.1 Designated use
The device described in these operating instructions may be used only for the purpose and in the manner
described in these operating instructions. Any other use is considered improper. Unauthorized modifications
or changes to enhance the performance are not permitted.
► Do not exceed the maximum load data specified in the documentation. Excessive loads lead to
irreparable damage.
► Do not make any structural modifications to the product.
► Do not use or store the device outdoors where it is wet.
► During welding work outdoors, use suitable protection against the weather conditions.
2.2 Responsibilities of the user
► Ensure that only suitably qualified personnel perform work on the device or system.
Suitably qualified personnel are:
— those who are familiar with the basic regulations on occupational safety and accident prevention;
— those who have been instructed on how to handle the device;
— those who have read and understood these operating instructions;
— those who have been trained accordingly;
— those who are able to recognize possible risks because of their special training, knowledge, and
experience.
► Keep non-suitably qualified people out of the work area.
2.3 Warning and information signs
The following warning, notice and mandatory signs can be found on the product:
These markings must always be legible. They may not be covered, obscured, painted over, or removed.
► Read and observe the operating instructions.
Warning against hot surfaces. Risk of burns.
► Do not touch hot surfaces.
Warning for risk of hair, fingers, and clothing being drawn in.
► Keep your hands out of the danger zone.
► Wear protective gloves.
Electric shock due to live parts
► Disconnect all electrical connections.
