iFEED 742
1 Identification
EN
-
5
(EN-GB) UK Declaration of Incorporation
in accordance with 2006/42/EC (Machinery), Annex. II, 1B for partly completed machinery
Manufacturer
Alexander Binzel Schweisstechnik GmbH & Co. KG
Kiesacker
35418 Buseck
Germany
Importer UK
ABICOR BINZEL (UK) ltd.
Binzel House, Mill Lane, Winwik Quay
Warrington WA2 8UA
United Kingdom
Authorized person for the
technical documentation
Mark Owens
Address – see address of Importer UK
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Product
Description
The wire feeder iFEED 742 is used for the automatic delivery of welding filler materials.
Designation
Wire feeder
Function
Feeder unit
Trade name
iFEED
Type
742
This declaration of conformity is issued under the sole responsibility of the manufacturer.
We herewith declare that the above mentioned device is a partly completed machinery and therefore, in terms of Article
13 of the Machinery Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery
(OJ L157, 09.06.2006), a machinery not functioning on its own, and for this reason it is not complying in all parts with the
relevant provisions of the Machinery Directive.
The partly completed machinery complies with the essential health and safety requirements of the Machinery Directive up
to the interfaces described in the technical documentation.
The special technical documents in accordance with Annex. VII part B of the partly completed machinery will be handed
over to the national authorities upon reasoned request. The documents are sent by post, either in paper form or on
electronic data medium.
Relevant Union harmonisation
legislation
Electrical Equipment (Safety) Regulations 2016
S.I. 2016/1101
Electromagnetic Compatibility Regulations 2016
S.I. 2016/1091
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012
S.I. 2012/3032
Ecodesign regulation 2019/1781 (electric motors and variable speed drives)
UK designated standards used
EN IEC 60974-5:2019
EN IEC 60974-10:2016
EN IEC 63000:2018
The following essential
requirements apply
1.5.1 / 1.5.2 / 1.5.6 / 1.7.1 / 1.7.2 / 1.7.4.1
In terms of Machinery Directive 2006/42/EC, the „partly completed machinery“ shall only be put into service when the final
machinery into which it is to be incorporated, has been declared in conformity with the provisions of this directive, as far
as this directive has to be applied for this machinery.
This declaration is valid for all specimen manufactured according to the relevant manufacturing drawings, which are part
of the technical documentation.
Buseck, 09.05.2023
Signature
Prof. Dr.-Ing. Emil Schubert, Managing Director
Archiving:
Document no.: 04-02-2023
20-Februar-2023
