12
FreedomDrive
4.6
Connecting the cable assemblies
Fig. 9
FreedomDrive to Cable Connections
The FreedomDrive unit is designed to pass through all operational functions;
wire, gas, power, control, and water (water-cooled version only). The various
pins and guides serve to align the mating surfaces during assembly.
Note: Do not mix water-cooled and air-cooled cables and FreedomDrive units.
Connecting to the Wire Feeder:
1. Insert the rear connector of the FreedomDrive cable into the receptacle at
the wire feed unit and secure by means provided (typically a thumb screw for
direct mount connections and a rotating nut for Euro connections)
(see 4.7, Fig. 10)
2. Properly mount the connections for water supply/return (if required), and
control lead (see 4.7, Fig. 10)
FreedomDrive
Back End
Rear Cable
Front Connector
Summary of Contents for FreedomDrive Abimig AT355
Page 23: ...23 FreedomDrive Notes...
