Abicor Binzel AUTC 61GD, Operating Instructions Manual

Page: 24 / 68

EN - 8
6 Putting into operation MAG
6.1 Equipping the torch
1 Insert gas diffuser (4) into torch neck (5) .
2 Screw tip adaptor (3) into torch neck (5) and contact tip (2) into tip
adaptor (3) .
3 Screw gas nozzle (1) onto torch neck (5) .
NOTE
• The MAG welding torches may only be put into operation by trained
personnel.
CAUTION
Risk of injury
Through-hole or puncture caused by electrode tip.
• Do not reach into the danger zone.
• Wear protective gloves.
1 Gas nozzle
2 Contact tip
3 Tip adaptor
4 Gas diffuser
5 Torch neck
Fig. 1 Type 61GD
1 2 3 4 5