Abicor Binzel ABIROB A Series, Operating Instructions Manual

Page: 45 / 112

EN - 23
ABIROB
®
A 12 Disposal
12 Disposal
When disposing of the system, local regulations, laws, provisions, standards
and guidelines must be observed. To correctly dispose of the product, it must
first be disassembled.

11 Disassembly on page EN-22
12.1 Materials
This product is mainly made of metallic materials, which can be melted in steel
and iron works and are thus almost infinitely recyclable. The plastic materials
used are labelled in preparation for their sorting and separation for later
recycling.
12.2 Consumables
Oil, greases and cleaning agents must not contaminate the ground or enter the
sewage system. These substances must be stored, transported and disposed of
in suitable containers. Please observe the relevant local regulations and
disposal instructions in the safety data sheets specified by the manufacturer of
the consumables. Contaminated cleaning tools (brushes, rags, etc.) must also
be disposed of in accordance with the information provided by the
consumables’ manufacturer.
12.3 Packaging
ABICOR BINZEL has reduced the transport packaging to the necessary
minimum. The ability to recycle packaging materials is always considered
during their selection.