Abicor Binzel ABIROB A Series, Operating Instructions Manual

Page: 31 / 112

EN - 9
ABIROB
®
A 4 Scope of delivery
4 Scope of delivery
The cable assemblies for the ABIROB
®
A welding torch system are available
in standard lengths of 1 - 3.5 m as well as customer-specific lengths. For a
complete system, you will require an alignment jig. This must be separately
ordered in line with the configuration.
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be
found in the current catalogue. Contact details for advice and orders can be
found online at
www.binzel-abicor.com .
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not
possible to fully exclude the risk of transport damage.
4.2 Storage
Physical storage conditions in a closed environment:

Tab. 2 Ambient conditions for transport and storage on page EN-6
• Torch-side cable support with integrated switch
housing
• Machine-side cable support with central
connector
• Operating instructions
The ABIROB
®
A welding torch system will not function with the ROBO cable assembly. Additional,
welding-task-dependent components are also required for the initial set-up.
These include the following:
• Torch neck (in the preferred size and geometry) • Bracket (required for attachment to the robot)
• Equipment parts and wear parts (order separately)
Tab. 6 Scope of delivery
Goods-in inspection Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
In case of complaints If the delivery has been damaged during transportation, contact the last
carrier immediately. Retain the packaging for potential inspection by the
carrier.
Packaging for returns Where possible, use the original packaging and the original packaging
material. If you have any questions concerning the packaging and/or how
to secure an item during shipment, please consult your supplier.
Tab. 7 Transport