Abicor Binzel ABIROB A Series, Operating Instructions Manual

Page: 34 / 112

EN - 12
6 Putting into operation ABIROB
®
A
6.1 Setting up the ABIROB
®
A torch neck
1 Screw the replaceable tip adaptor (3) into the torch neck (4) and tighten
using the switch key wrench (8) .
2 Screw the contact tip (2) into the tip adaptor (3) and tighten using the
switch key wrench (8) .
3 Screw the gas nozzle (1) onto the tip adaptor (3) hand tight.
4 Insert the torch neck (4) into the connection module (5) until reaching the
stop.
5 Use the Allen key (6) to tighten the set screws (7) .
1 Gas nozzle
2 Contact tip
3 Tip adaptor
4 Torch neck
5 Connection module
6 2 x set screw M5
7 AF 2.5 mm Allen key
8 Switch key wrench
Fig. 4 Setting up the ABIROB
®
A torch neck
1 2 3 4
5
6 7 8