ABELL A-82 UHF Service Manual
- 7 -
·
Programming Interface Cable description
(PC programming interface cable: Option)
The programming interface cable is required to interface the A-82 with the computer. It has a circuit in
its D-sub connector (9-pin) case that converts the RS-232C logic level to the TTL level. The
programming interface cable connects the side panel jacks of the A-82 to the computer’s RS-232C
serial port.
·
Programming software description
By installing programming software of A-82, users are allowed to program the transceiver with
programming interface cable.
·
Programming with PC
If data is transferred to the transceiver from a personal computer with software provide by ABELL, the
destination data (basic radio information) for each set can be modified. Normally, it is not necessary to
modify the destination data because their values are determined automatically when the frequency
range (frequency type) is set.
The values should be modified only if necessary.
Data can be programmed into the EEPROM in RS-232C format via the SP MIC plug.
