Control Panel Buttons
1-9
1
Start Here
Index
Contents
Control Panel Buttons
A brief description of the Control Panel and its button groups follows.
The Menu Screen
Menu Display
The menu screen is in the upper left corner of the Control Panel. You can
adjust brightness and contrast in the Engineering Setup menu.
Menu Labels and Controls
Some of the information displayed in the menu screen changes depending on
DVEOUS' current status and the current menu. The figure below shows a typ-
ical display.
The top line shows the current menu title, and indicates the currently selected
master channel (the one the menu settings reflect): 1A, 1B, 2A, or 2B. The
master channel display does not appear in global menus.
A menu can have up to three different softkeys. The softkey labels appear on the
left side of the menu screen. Select a softkey by pressing the button next to its
label. When you press a softkey, a black highlight indicates that it is active. If
there is more than one label for the softkey, pressing it toggles the function, and
the highlight indicates the active mode. Also, up to four parameters for each
softkey function can appear above the softknobs at the bottom of the menu dis-
play. You can adjust these settings with the softknobs, the keypad, or the joy-
stick. The motion path type assigned to the parameter appears above the
softknob values.
BORDER
Edge
Soft
LEFT
-0.5000
LN
RIGHT
0.5000
LN
BORDER/CROP
Ch 1A
COLOR
KEYPAD
CURRENT TIME:
0:00 CURRENT EFFECT: WorkSpace REMAINING KFs: 300
KF#
LEFT
RIGHT
TOP
Gb
1A
1B
2A
2B
BOTTOM
LN
-0.3750
BOTTOM
TOP
LN
0.3750
CROP
Edge
Soft
Menu Softkeys
Menu Functions
Menu Title
Master
Channel
Channel
Delegation
Status
Keypad
Buffer
Effect
WorkSpace
Parameter
Softknobs
Function
Parameters
