manualshive.com logo in svg

Abeeway Industrial Tracker, Reference Manual

Share
Download
Abeeway Industrial Tracker Reference Manual Download Page 17

Industrial Tracker Reference Guide FW 1.8 V0.2

5.3.3

Low power GPS 

With this technology, the device sends the data given by the GPS module before the 

agps_timeout

delay expiry and the positon calculaton is done by the ABEEWAY server. 
If  the  GPS  component   didn’t  succeed  in  having   enough   data  to provide  to the  server,  a  LPGPS
tmeout message is sent instead of a LPGPS data message.

Notes

1i In the case there the  

agps_timeout

  value is greater than the  

ul_period,

  the actual GPS

tmeout till be 

ul_period.

2i The GPS positon obtained in this mode does not pay atenton to the parameters described

in the precedent secton (gps_convergence, gps_ehpe and gps_tmeout).

5.3.4

WIFI

Since a WIFI scan is altays done tithin fve seconds, there is no tmeout parameter.
Once  the scan  is done, the BSSIDs are  sent   via   LoRa   tith   the associated RSSI and   the   positon
calculaton is done by the ABEEWAY server.
In a mult technology geolocaton, a WIFI scan tith the number of BSSIDs greater than or equals to 3
is considered as successful, and a WIFI positon message is reported via LoRa.
Less than 3 BSSIDs triggers a technology stitch (move to GPS or LPGPS).

5.3.5

Mult-technologies

These technologies use tto diferent components in a same geolocaton cycle:

WIFIiGPS: Start tith a WIFI scan, then stitch to the GPS in case of WIFI failure.

WIFIiLPGPS: Start tith a WIFI scan, then stitch on the LPGPS in case of failure.

WIFI- GPS and WIFI-LPGPS

A WIFI scan result is considered as successful if at least three BSSID are present in the scan. In this
case a WIFI positon message is sent via LoRa. Othertise, the tracker tries immediately the next
geolocaton technology (GPS or LPGPS), in the same geolocaton cycle. 
The picture belot shots the tming diagram.

Page 17 of 46

10th July 2019

Restricted distribution

Summary of Contents for Industrial Tracker















































Reviews:

No comments

Brands by name

Popular brands

Load more brands