å
Fasten the BRACES (T) to the BOTTOM (E2). Use four
BROWN 1-1/2" FLAT HEAD SCREWS (14S).
å
Fasten the BOTTOM (E2) to the LEFT END (B). Tighten
two
FASTENERS.
Step 9
Page 13
B
E2
How to use the
FASTENER
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Dowel end
J
Sur
face without
HIDDEN CAMS
Surface with
FASTENERS
Sur
face
ith
FAS
ENE
S
E2
T
T
BROWN 1-1/2" FLAT HEAD SCREW
(4 used in this step)
14S
This hole should be
closer to this edge.
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
These edges
must be even.