![background image](http://html1.mh-extra.com/html/abc/storage-cabinet/storage-cabinet_manual_3328682021.webp)
Page 21
Step 17
å
Carefully stand your unit upright.
å
Before fastening the DOOR to your unit, be sure the mounting screw is against the stops as shown in the right diagram. If
it isn't, loosen the mounting screw to slide it against the stops. Then tighten the mounting screw.
å
Fasten a DOOR (G) to the RIGHT END (A) as shown in the lower diagram. Use the screws in the HINGES. You should start
each SCREW a few turns before completely tightening any of them.
å
Fasten a KNOB (95K) to the DOOR (G). Use a GRAY 1-3/8" MACHINE SCREW (39S).
å
Peel the FELT DISC from the FELT DISC CARD (1M) and stick them on the DOOR (G) where they will come in contact with
the UPRIGHT (C).
å
Repeat this step for the other DOOR (G).
å
See the next step for DOOR adjustments.
G
C
1M
1M
A
95K
1M
1M
Mounting
screw
Stop
Hinge
GRAY 1-3/8" MACHINE SCREW
(2 used in this step)
39S