background image

 

85 

 

TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER

 

 

   

     

   

 

     

 

 

 

  NOTE:   

Turn the key to the "REG" (REGISTER) position for registering sales transactions.

 

 

 IMPORTANT:

  It is not necessary to press the Decimal Point when ringing up a price. 

 

 REMINDER:

 

If Clerk Numbers are programmed, be sure to 

ENTER

 the 

(CLERK #)

, then 

PRESS

 the  

 

 

 

[CLERK]

 key before ringing up a sale. 

 

In the examples below, Department 1 is programmed as taxable with a 6% (TAX 1) rate and Clerk #1 is used. 
 
 
EXAMPLE 35:

  VOIDING A PLU SALE WITH A COUPON DISCOUNT

 - (Assume PLU #1 is preset for the price 

of $1.00 in Department 1 and deduct a 20¢ coupon.  Void this entry): 

 
 1.

 ENTER 

(1)

PRESS

 the 

[VOID]

 key, then 

PRESS

  

 

-VOID- 

  

 

the 

[PLU]

 key. 

PLU 0001    1.00 

 2.

 ENTER 

(20)

PRESS

 the 

[VOID]

 key, then 

PRESS

  

-VOID- 

  

the 

[-/CPN]

 key. 

COUPON  N    0.20 

 3.

 PRESS

 the 

[AMOUNT TEND/TOTAL] 

key. 

ITEM CT 

            -1 

 

 

 

- or -

 TAX 

 

-0.04 

 1.

 PRESS

 the 

[VOID]

 key, 

ENTER (1)

, then 

PRESS

 

CASH  

-0.84 

  

the 

[PLU]

 key. 

 2. 

PRESS

 the 

[VOID]

 key, 

ENTER (20)

, then 

PRESS

 

 

 

the 

[-/CPN]

 key. 

 3. 

PRESS

 the 

[AMOUNT TEND/TOTAL] 

key. 

 
 
EXAMPLE 36:

  VOIDING A PLU SALE WITH A MINUS PERCENTAGE DISCOUNT

 - (Assume PLU #1 is preset 

for the price of $1.00 in Department 1 and the [-%] key is pre-programmed for 10%.  Ring up PLU 
#1, deduct 10%, then void this entry): 

 
 1.

 ENTER 

(1)

, then 

PRESS

 the 

[PLU]

 key. 

 

-VOID- 

 2.

 PRESS

 the 

[-%]

 key.  

PLU 0001    1.00 

 

 

If the Minus Percentage Discount Rate is NOT  

 

10  -%N    -0.10 

 

 

pre-programmed, type in the discount rate before 

ITEM CT 

            -1 

 

 

pressing the [-%] key. 

TAX 

 

-0.05 

3.

    PRESS 

the 

[AMOUNT TEND/TOTAL] 

key. 

CASH  

-0.95 

4.

 PRESS 

[VOID]

,

 ENTER (1)

, then

 PRESS

 

 

 

 

the

 [PLU] 

key. 

 5. 

PRESS

 the 

[-%]

 key. 

 6.

 PRESS 

the 

[AMOUNT TEND/TOTAL] 

key. 

 
 
EXAMPLE 37:

  VOIDING A PLU SALE WITH A PLUS PERCENTAGE RATE

 - (Assume PLU #1 is preset for the 

price of $1.00 in Department 1 and the [+%] key is pre-programmed for 10%.  Ring up PLU #1, 
add 10%, then void this entry): 

 
 1.

 ENTER 

(1)

, then 

PRESS

 the 

[PLU]

 key. 

 

-VOID- 

 2.

 PRESS

 the 

[+%]

 key. 

PLU 0001    1.00 

 

 

If the Plus Percentage Rate is NOT pre-programmed, 

                 10  +%N    -0.10 

 

 

type in the discount rate before pressing the [+%] key. 

ITEM CT 

            -1 

3.

 PRESS 

the 

[AMOUNT TEND/TOTAL] 

key. TAX 

 

-0.06 

4.

 PRESS 

[VOID]

ENTER (1)

, then 

PRESS

 the 

[PLU]

 key. 

CASH  

-1.16 

 5. 

PRESS 

the 

[+%] 

key. 

 6.

 PRESS 

the 

[AMOUNT TEND/TOTAL] 

key. 

abcoffice

www.abcoffice.com                 1-800-658-8788

Summary of Contents for Alpha9155sc



























































































































Reviews: