background image

 

 

 

(Continued)   

TABLE OF CONTENTS

  

                                                                                                                                        

                 

     

  

 

Example 36: 

Voiding a PLU Sale with a Minus Percentage Discount---------------------------------------------------------------------------------------------------------- 85 

Example 37: 

Voiding a PLU Sale with a Plus Percentage Rate ----------------------------------------------------------------------------------------------------------------- 85 

Example 38: 

Issuing a Duplicate Receipt ---------------------------------------------------------------------------------------------------------------------------------------------- 86 

X/Z MANAGEMENT REPORTS ---------------------------------------------------------------------------------------------------------------------------------------------------------87-96 

“X” Position Reading ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 87 
“Z” Position Reading ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 87 
Management Reports Available ------------------------------------------------------------------------------------------------------------------------------------------------------------- 87 
Summary Management Reports---------------------------------------------------------------------------------------------------------------------------------------------------------88-89 
To Take a Cash-in-Drawer / Check-in-Drawer Report  -------------------------------------------------------------------------------------------------------------------------------- 90 
To Take an Hourly Report --------------------------------------------------------------------------------------------------------------------------------------------------------------------- 90 
To Take a Department Range Report------------------------------------------------------------------------------------------------------------------------------------------------------ 91 
To Take a Clerk Report ------------------------------------------------------------------------------------------------------------------------------------------------------------------------ 91 
To Take an Individual Clerk Report --------------------------------------------------------------------------------------------------------------------------------------------------------- 92 
To Take a PLU Report ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 92 
To Take a Cash Declaration Report -------------------------------------------------------------------------------------------------------------------------------------------------------- 93 
To Take a Group Report ----------------------------------------------------------------------------------------------------------------------------------------------------------------------- 94 
To Take a Full Report -------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 95 
To Take a (Weekly or Monthly) Full Report----------------------------------------------------------------------------------------------------------------------------------------------- 95 
“Z1” Reading - Full Report Illustration ------------------------------------------------------------------------------------------------------------------------------------------------------ 96 

PC INTERFACE AND SOFTWARE -------------------------------------------------------------------------------------------------------------------------------------------------------- 98 
TROUBLESHOOTING ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 99

 

In Case of an Error Tone or if "E" Displays ----------------------------------------------------------------------------------------------------------------------------------------------- 99 
If Printing Problems Occur -------------------------------------------------------------------------------------------------------------------------------------------------------------------- 99 
If Cash Register is Malfunctioning----------------------------------------------------------------------------------------------------------------------------------------------------------- 99 
Opening the Cash Drawer in an Emergency --------------------------------------------------------------------------------------------------------------------------------------------- 99 
Half System Clear Procedure----------------------------------------------------------------------------------------------------------------------------------------------------------------- 99 
Full System Clear Procedure ----------------------------------------------------------------------------------------------------------------------------------------------------------------- 99 

SPECIFICATIONS and SAFETY---------------------------------------------------------------------------------------------------------------------------------------------------- 100-101 
ACCESSORIES ORDER FORM ---------------------------------------------------------------------------------------------------------------------------------------------------------- 103 
APPENDIX 1 - STATE TAX TABLE CODES ------------------------------------------------------------------------------------------------------------------------------------ 104-109 
APPENDIX 2 - CALCULATING STATE TAX TABLE CODES -------------------------------------------------------------------------------------------------------------- 110-114

 

APPENDIX 3 - GST/PST FOR CANADA ----------------------------------------------------------------------------------------------------------------------------------------- 115-116 

 
 

abcoffice

www.abcoffice.com                 1-800-658-8788

Summary of Contents for Alpha9155sc



























































































































Reviews: