background image

 

TABLE OF CONTENTS  

 

(Continued)

 

                                                                                                                                               

               

 

 

 

 
GRAND TOTAL PRESET--------------------------------------------------------------------------------------------------------------------------------------------------------------------- 41 

To Set the Grand Total to Zero -------------------------------------------------------------------------------------------------------------------------------------------------------------- 41 
To Assign a Value to the Grand Total------------------------------------------------------------------------------------------------------------------------------------------------------ 41 

TRANSACTION NUMBER PRESET------------------------------------------------------------------------------------------------------------------------------------------------------- 42 

To Program the Transaction Number ------------------------------------------------------------------------------------------------------------------------------------------------------ 42 
Rounding Method for Finalizing Amount -------------------------------------------------------------------------------------------------------------------------------------------------- 43 

X1 and X2 COUNTER PRESET ------------------------------------------------------------------------------------------------------------------------------------------------------------ 44 

To Program the X1 Counter Number------------------------------------------------------------------------------------------------------------------------------------------------------- 44 
To Program the X2 Counter Number------------------------------------------------------------------------------------------------------------------------------------------------------- 44 

Z1 and Z2 COUNTER PRESET------------------------------------------------------------------------------------------------------------------------------------------------------------- 45 

To Program the Z1 Counter Number------------------------------------------------------------------------------------------------------------------------------------------------------- 45 
To Program the Z2 Counter Number------------------------------------------------------------------------------------------------------------------------------------------------------- 45 

PROGRAMMING ALPHANUMERIC DESCRIPTIONS ---------------------------------------------------------------------------------------------------------------------------46-51 

Alpha Keyboard ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 46 
To Input Character ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ 46 
Alphanumeric Code Chart--------------------------------------------------------------------------------------------------------------------------------------------------------------------- 47 
Wide Characters--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 48 

PROGRAM STORE LOGO/COMMERCIAL MESSAGE -------------------------------------------------------------------------------------------------------------------------49-51 
SCROLL MESSAGE --------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 52 
SCROLL MESSAGE SETTINGS ----------------------------------------------------------------------------------------------------------------------------------------------------------- 53 
SCROLL MESSAGES PATTERN ---------------------------------------------------------------------------------------------------------------------------------------------------------- 54 
TO PROGRAM THE TRANSACTION WORDS-------------------------------------------------------------------------------------------------------------------------------------55-58 
FLAG OPTIONS -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------59-65 

To Take a Flag Report ------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 59 

PROGRAM CONFIRMATION REPORTS --------------------------------------------------------------------------------------------------------------------------------------------66-68 

To Take a Program Confirmation Basic Preset Report-------------------------------------------------------------------------------------------------------------------------------- 66 
To Take a Clerk Confirmation Report ------------------------------------------------------------------------------------------------------------------------------------------------------ 67 
To Take a Department Report --------------------------------------------------------------------------------------------------------------------------------------------------------------- 68 

PLU CONFIRMATION REPORT------------------------------------------------------------------------------------------------------------------------------------------------------------ 69 

To Take a PLU Confirmation Report ------------------------------------------------------------------------------------------------------------------------------------------------------- 69 
To Take a PLU Range Report --------------------------------------------------------------------------------------------------------------------------------------------------------------- 69 

TRANSACTION EXAMPLES FOR OPERATING THE CASH REGISTER --------------------------------------------------------------------------------------------------70-86

 

Sample Receipt ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 70 
Transaction Symbols --------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 70 
Example 1: 

Cash Sale Without Tendering Change ------------------------------------------------------------------------------------------------------------------------------- 71 

Example 2:  

Cash Sale With Tendering Change ----------------------------------------------------------------------------------------------------------------------------------- 71 

Example 3:   

Using the Dept Shift Key and Tendering Change ----------------------------------------------------------------------------------------------------------------- 71 

Example 4:   

Charge Sale ----------------------------------------------------------------------------------------------------------------------------------------------------------------- 72 

Example 5:   

Check Sale------------------------------------------------------------------------------------------------------------------------------------------------------------------- 72 

Example 6:   

Split Tendering Sale ------------------------------------------------------------------------------------------------------------------------------------------------------- 72 

Example 7:   

No-Sale Function----------------------------------------------------------------------------------------------------------------------------------------------------------- 73 

Example 8:   

Registering a Reference Number-------------------------------------------------------------------------------------------------------------------------------------- 73 

Example 9:   

Multiplying by a Fraction-------------------------------------------------------------------------------------------------------------------------------------------------- 73 

Example 10: 

Multiplication Sale ---------------------------------------------------------------------------------------------------------------------------------------------------------- 74 

Example 11: 

Registering a Department Unit Price---------------------------------------------------------------------------------------------------------------------------------- 74 

Example 12: 

Multiplication of a Department Unit Price ---------------------------------------------------------------------------------------------------------------------------- 74 

Example 13: 

Department ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 75  

Example 14: 

Exempting Tax on an Item ----------------------------------------------------------------------------------------------------------------------------------------------- 75 

Example 15: 

Adding Tax to a Non-Taxable Department -------------------------------------------------------------------------------------------------------------------------- 75 

Example 16: 

Received-On-Account Sale---------------------------------------------------------------------------------------------------------------------------------------------- 76 

Example 17: 

Paid-Out Sale --------------------------------------------------------------------------------------------------------------------------------------------------------------- 76 

Example 18: 

Return Sale ------------------------------------------------------------------------------------------------------------------------------------------------------------------ 76 

Example 19: 

Coupon Discount Sale ---------------------------------------------------------------------------------------------------------------------------------------------------- 77 

Example 20: 

Minus Percentage Discount Sale -------------------------------------------------------------------------------------------------------------------------------------- 78 

Example 21: 

Plus Percentage Sale ----------------------------------------------------------------------------------------------------------------------------------------------------- 79 

Example 22: 

Use of Error-Correct (EC) Key------------------------------------------------------------------------------------------------------------------------------------------ 80 

Example 23: 

Voiding a Sale--------------------------------------------------------------------------------------------------------------------------------------------------------------- 80 

Example 24: 

Voiding a Multiplication Sale -------------------------------------------------------------------------------------------------------------------------------------------- 80 

Example 25: 

Voiding a Coupon Sale --------------------------------------------------------------------------------------------------------------------------------------------------- 81 

Example 26: 

Voiding a Minus Percentage Discount Sale------------------------------------------------------------------------------------------------------------------------- 81 

Example 27: 

Voiding a Plus Percentage Sale---------------------------------------------------------------------------------------------------------------------------------------- 81 

Example 28: 

Voiding a Department Preset Price------------------------------------------------------------------------------------------------------------------------------------ 82 

Example 29: 

Voiding a Multiplication of a Department Preset Price ----------------------------------------------------------------------------------------------------------- 82 

Example 30: 

Voiding a Department Preset with a Minus Percentage Discount--------------------------------------------------------------------------------------------- 83 

Example 31: 

Voiding a Department Preset with a Coupon Discount ---------------------------------------------------------------------------------------------------------- 83 

Example 32: 

PLU Sale --------------------------------------------------------------------------------------------------------------------------------------------------------------------- 84 

Example 33: 

Voiding a PLU Sale -------------------------------------------------------------------------------------------------------------------------------------------------------- 84 

Example 34: 

Voiding a PLU Multiplication Sale-------------------------------------------------------------------------------------------------------------------------------------- 84 

Example 35: 

Voiding a PLU Sale with a Coupon Discount ----------------------------------------------------------------------------------------------------------------------- 85 

 

abcoffice

www.abcoffice.com                 1-800-658-8788

Summary of Contents for Alpha9155sc



























































































































Reviews: