GB 4
cord.
5. To keep the laser pick up clean,do not touch it,and do not forget to close the disc tray.
6. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean,
dry cloth.
7. In order to shut off the power to this product completely, unplug the power cord form the wall outlet.
Be sure to unplug the unit if you do not intend to use it for an extended period of time, such as a
vacation.
8. Keep this manual in a safe place for further reference.
Beware of Condensation
When the player(or an compact disc) is moved from a cold to a warm place or is used after asudden
temperature change, these is a danger of condensation. Water vapor in the air could condense on the
mechanism or the laser pickup. If droplets of water form on these parts. Correct playback will be
impossible because the laser cannot read the information from the disc correctly. To prevent this, if you
are going to use the player in a condition where condensation could occur, you should leave the player
for 1 to 2 hours after plugging it into an AC outlet depending on the amount of condensation. If this is
done, the player will stabilize at the temperature of its surroundings.
Handling Records
·
Do not touch the record
’
s grooves. Only handle records by the ledges or the label with clean hands.
Otherwise, the dirty handle can leave a residue on the recode surface that will gradually deteriorate the
quality of your record.
·
Using a soft anti-static cloth to gently wipe the record surface when the record has become dirty.
·
Keep records in their shield when not in use.
·
Store records upright on their edges. The level store would make it become curved.
·
Avoid placing IR in direct sunlight or close to a source of heat such as radiators, stoves. Also avoid
location subject to vibration and excessive dust, heat, cold or moisture.
How to Replace the Stylus
The stylus should last about 50 hours under normal use. However it is recommenced that the stylus be
replaced as soon as you notice a change in sound quality. Prolonged use of a worn-out stylus may
damage the record. The highest speed of 78 RPM records would wear out the stylus more quickly.
Label grooves
