Abbriata M100 Series, Use And Maintenance Handbook

Page: 6 / 27

Use and maintenance handbook – ed_07/04/2016
Round baler – M100 / M120 / M150
6
EN
GL
IS
H
SAFETY
SAFETY LABELS
Before starting any operation
make sure you have read and
understood this manual. All
interventions of maintenance or
modification must be made
according to the descriptions
given in this manual. Failure to
observe these instructions can
cause accidents or breakage of
the machine.
When it is necessary to perform
maintenance or controls with the
rear door open, apply the
special safety stops on both
hydraulic jacks.
Do not approach the universal
joint with the machine in motion.
When unloading the bale there
must not be anyone behind the
machine.
It is obligatory to close the
casings before starting the
machine. Warning: when the machine is
detached from the tractor, use
the supplementary wedges.
Introduce or adjust the binding
twine or adjust the transmission,
only after having removed the
protections with motor off.
If the tractor does not have a
soundproofed cab, wear
earplugs.
Indication of maximum vertical
load on the towing eye.
When closing the rear chamber,
do not insert the hands between
the casings.
Do not approach the swinging
door on the round baler while
the tractor is in motion.
Turn off the tractor before
performing pick-up operations.