Abbriata M100 Series, Use And Maintenance Handbook

Page: 5 / 27

Use and maintenance handbook – ed_07/04/2016
Round baler – M100 / M120 / M150
5
EN
GL
IS
H
WARRANTY
The machine built by the company is guaranteed for 12 consecutive months from the date of purchase, provided that it is
used according to the instructions contained in the Use and Maintenance manual and operates under normal working
conditions. It is only under these conditions that the manufacturer agrees to supply spare parts, at no charge, for those
components which, in the opinion of the manufacturer, have production or material defects; or, in its unquestionable opinion,
to make repairs directly or by using authorized personnel.
The buyer will pay for any labor and transportation costs relative to this warranty.
The warranty expires if the equipment was used without complying with the instructions contained in the Use and
Maintenance manual, or it is was repaired, disassembled or modified by unauthorized workshops.
Spare parts replaced under the warranty must be returned to the manufacturer.
The warranty will not be valid for cases involving poor maintenance and abnormal use of the machine. Any disputes will be
under the competence of the judicial authorities of Alessandria - Italy.
INTRODUCTION
Read this manual carefully before using the machine.
This handbook conforms with EEC Machine Directive 89/392 and subsequent amendments.
The manufacturer reserves the right to make changes, without prior notice and without any sanctions, without affecting the
main technical and safety data.
The symbol WARNING calls the reader’s attention to indicate that non-compliance may lead to personal injuries or
death of the operator.
This publication is divided into chapters which discuss the relative machine use and maintenance operations.
Please follow these instructions to ensure the best machine operating efficiency.
It is recommended to use only original spare parts (consult the Spare Parts catalogue).
•
This manual indicates the standards that will guarantee regular machine maintenance and use, thus avoiding problems
which might damage the machine and reduce its operating performance.
•
Despite the fact that technical service is available at any time, the manufacturer is not responsible for any non-
compliance with the standards contained in this handbook.
•
This machine was built for operations only for the agricultural sector and therefore the owner will be personally
responsible for any improper use of the round baler. Any other use is considered to be improper.
•
In case of any breakdown the machine must be repaired by personnel with knowledge of safety conditions so as to
respect the accident prevention regulations and rules regarding technical safety, circulation on public thoroughfares and
first aid.
•
When the machine is delivered, ascertain that it has undergone no damage in shipment and that it is complete with any
accessories. Claims can only be accepted if received in writing within eight days of delivery.
MARKING AND IDENTIFICATION
Upon receipt of the machine check the marking on the frame of the machine (fig.1).
Fig.1
(EXAMPLE OF MAKE-UP OF
IDENTIFICATION PLATE)
Each individual machine is provided with a CE
identification plate and a CE certificate of
conformity pursuant to EEC directive 89/392
and subsequent modifications.