ABB XAC19590, Operation Manual

Page: 66 / 136

Operation Manual / 4 Product description / A200-L
6 Periodic maintenance / 6.4 Cleaning the compressor during opera-
tion
© Copyright 2018 ABB. All rights reserved. HZTL4036_EN Revision M August 2018
Repeating the cleaning
If the cleaning is still unsuccessful after three processes, it is recommended to have the tur-
bocharger checked and cleaned by an ABB Turbocharging Service Station if the engine val-
ues are unsatisfactory.
Volume of water per cleaning process
Product Quantity [dm
3
]
A265-L 2.0
A270-L 2.0
A275-L 3.0
A280-L 3.0
Table 12: Volume of water per cleaning process
The filling time is 4 ... 15 seconds.
Checking the filter plug
The filter plug only needs to be checked in the turbocharger version with a cast filter silen-
cer. See chapter
Design variants → 58 .
Fig. 18: Filter plug view
Disassembly and checking of the filter plug (81125) is required if, 20 seconds after the clean-
ing process, water is still visible in filler opening B.
u
Loosen and remove the filter plug (81125) with box spanner.
u
Clean the drill holes of the plug.
u
Fit filter plug (81125).
Part number A265-L A270-L A275-L A280-L
81125 G1/2"
45 Nm
G1/2"
45 Nm
G1/2"
45 Nm
G1/2"
45 Nm
Table 13: Tightening torques (81125)
Page
38
/
108