ABB Welcome M2233 Series, Manual

Page: 46 / 258

ABB-Welcome M
Operation
| — 45 —
to this size.
- The format supported is "jpg".
4 Automatic Fullscreen
- Activate or deactivate the full-page mode of the door camera by ticking
the checkbox. The full-page mode remains active during the period when
the picture of the visitor is shown after the door bell rings.
5 OK
- Click on this button to activate the settings.
6 Back
- Click on this button to return to the start page without saving the settings.
7 Calibration
- If the buttons and the associated graphics of the display are no longer
superimposed, the monitor must be calibrated.
- Click on the calibration button and then consecutively click on the 5
displayed position crosses. Finally confirm the dialogue box displayed.
The display has been calibrated.
8 Screen saver Off After
- Select the active period for the screen saver via the fold-down menu until
it switches off automatically.
- Available for 5 / 15 / 30 minutes.
- To protect the display the maximum operating time is limited to 30
minutes.
9 Screen saver Start After
- Select the start time for the screen saver via the fold-down menu.
- Available for 30 / 60 / 120 seconds.