ABB Welcome M2233 Series, Manual

Page: 35 / 258

ABB-Welcome M
Operation
| — 34 —
4.2.12.5 Leave Home Management
Fig. 22 Leave Hom e Managem ent
Information about the settings
User can only choose “Call forward” or “Message leaving”. Two functions can’t be
activated at the same time!
A warning will be given once “call transfer” or “Message Leaving” is activated.
The “Leave Home Management” menu has the following functions (The function only
can be set in master indoor station):
No. Functions
1 Call Forward
- Tick the checkbox to activate or deactivate the call forward command.
- Choose the target type through the fold-down menu.
- Tick address numeric keyboard to edit the address if a call type comes
from an indoor station.
- If the call forward function is activated, the auto unlock function will
be disabled.
2 Message Leaving
- Tick the checkbox to activate or deactivate the call forward.
- If the messages leaving function is activated, the auto unlock
function will be disabled.
* Absence message must be set first . If no absence message is set,
there will be a warning which prompts the users to set the absence
message first in the “Voice Message” menu.
4
3
1
2