1MRS755014
SPA-ZC 302
39
Profibus-DPV1/SPA Gateway
Installation and Commissioning Manual
5.4.2.5.
Get firmware version
To check the firmware version of the connected gateway, see Fig. 5.4.2.5.-1, select
Device > Get Firmware
.
A050355
Fig. 5.4.2.5.-1 Checking the firmware version
The gateway must be in configuration mode when you get the firmware version.
5.4.3.
Settings
In the Settings drop-down menu, you can select serial port COM1, COM2, COM3
or COM4.
Fig. 5.4.3.-1
Settings menu
5.4.4.
Slave menu
In the Slave menu, you can change the slave address for all the signals
simultaneously. If you want to change the slave address for all the signals, select
Slave > Set Address
from the Slave menu, see Fig. 5.4.4.-1. For more information,
see Section 4.2. New configuration and Section 4.3. Multislave configuration.
A050297
Fig. 5.4.4.-1
Slave menu
