Section 6
Communication with PCM600 and
SAM600 system
GUID-6C333AA9-C562-49EB-8BC9-0A0B4B76984E v1
The communication between PCM600 and SAM600 system is independent of the
communication protocol used within the substation. The communication media for SAM600
system is USB.
Any USB on a SAM600 module can be used to connect PCM600 in order to establish a
connection with a SAM600 system.
Access to a SAM600 system is possible only through PCM600 and a physical connection to any
SAM600 module in a SAM600 system is through USB, see
IEC18000116 V1 EN-US
Figure 43: SAM600 system communication with PCM600
6.1
Common write
GUID-6D2ACB6C-B1AC-4FFC-8576-823767E1B31B v1
Once a SAM600 system engineering is completed, the system writes the configuration to a
SAM600 system.
Perform Common Write action from a SAM600 system context menu by selecting Write to
IED…option, see
1MRK 511 433-UEN B
Section 6
Communication with PCM600 and SAM600 system
SAM600 Process Bus I/O System
41
Engineering manual
© Copyright 2017 ABB. All rights reserved
