11
Disassembly instruction emaX 2 e2.2
23
Manually remove the 2 springs located at both
sides of the sliding contacts block.
25
By means of the flat screwdriver unhook the
right side wall from the sliding contacts main
assembly as indicated in the picture.
24
Manually remove the auxiliary position
contacts cap located on the left side of the
sliding contacts block.
26
By means of the flat screwdriver unhook the
right side wall from the sliding contacts main
assembly as indicated in the picture.
22
Manually remove the sliding contacts block.
21
By means of the flat screwdriver push up the
3 flat cables assemblies and the connector
cables assembly.
