ABB S800 Product Manual Download

Page: 147 / 186

Section 3 Technical Data and Performance

Power Supply and Cooling Requirements

3BSE015969-600 A

147

Power Supply and Cooling Requirements

A quick guide for power consumption to be used in a preliminary phase of a project
work or whenever you need estimated figures is provided in

Table 31

Table 31. Estimated System Power Consumption

S800 I/O Station

24 V d.c.

Power

Consumption (A)

Base cluster, single FCI, with six (6) I/O Modules

0.5

Base cluster, single FCI, with twelve (12) I/O Modules

1.0

Base cluster, redundant FCIs (2), with six (6) I/O Modules

1.0

Base cluster, redundant FCIs (2), with twelve (12) I/O Modules

1.5

Base cluster, redundant FCIs (2), with six (6) pairs of redundant
I/O Modules

1.5

Additional I/O cluster with six (6) I/O Modules

0.5

Additional I/O cluster with twelve (12) I/O Modules

1.0

Additional I/O cluster, redundant Optical ModuleBus modem (2),
with six (6) pairs of redundant I/O Modules

(1)

(1) One pair of redundant I/O Modules counts as two I/O Modules.

1.0

Additional I/O cluster, redundant Optical ModuleBus modem (2),
with twelve (12) I/O Modules

1.5

Additional I/O cluster, redundant Optical ModuleBus modem (2),
with six (6) I/O Modules

The estimates are based on fully loaded I/O stations with a mixed configuration
of DI/DO and AI/AO.



Only power distributed via the ModuleBus are included. External 24 V connected
directly to the I/O modules for external loads and transmitters are not included.



When using AO820 and/or DO820/DO821, these load figures may be exceeded
and a load calculation can be useful to do, see

Table 32

Summary of Contents for S800


























































































































































































Search results

Summary of Contents for S800

Reviews:

Related manuals for S800

Brands by name

Popular brands

ABB S800, Product Manual

Search results

Summary of Contents for S800

Reviews:

Related manuals for S800

Brands by name

Popular brands