____________________________________________________________________________________________________________
V2
S500
Hardware
1-11 System
Data
S500 / Issued: 01.2007
AX522
DX522
All modules OK, then one of the I/O modules is removed
UP is present at all modules, FBP is plugged
Situation:
PWR
FB
P
S-
ERR
I/O-Bus
UP
CH-ERR1
CH-ERR2
UP
CH-ERR2
CH-ERR4
UP
CH-ERR1
CH-ERR2
DC505-FBP
AX522
DX522
DC505
DI524
UP
CH-ERR1
CH-ERR2
CH-ERR3
CH-ERR4
DI524
An I/O bus error is sent to the fieldbus master, the I/O-Bus turns to the reset status or
gets the replacement values
After that, an I/O module of an other type is inserted
into the free place
Situation:
The status of the error message remains unchanged
LEDs:
LED OFF
green LED ON
green LED flashes
red LED ON
red LED flashes
Figure: One module was removed and then replaced by a module of an other type