manualshive.com logo in svg

ABB RTU500 series, User Manual

Share
Download
ABB RTU500 series User Manual Download Page 37

RTU500 series Remote Terminal Unit

Test & Simulation

Enable Logging and Debugging

ABB AG - 1KGT 150 924

 

V000 1 | 4-1

4 Test & Simulation

4.1 Enable Logging and Debugging

If one or more logging/debug interfaces are granted (see Chapter 2.5.1), the user with the necessary
privileges has to enable the logging/debug interface, before the function can be used.

Figure 37: Activation of Debugging Options

– Time administration test mode:

If this feature is enabled, the Time admistration dialog is enabled and it is possible to set the
RTU time manually

– Signal test mode:

If this feature is activted Signal can be simulated with the navigation frame items Input and Out-
put, Systemevent and system command and Security events.

– PLC online debugging:

If the PLC debugging feature is activated by one user, all other user, having this privilege, can
use this PLC debugging option of Multiprog wt. This feature must be enabled to get online
access between Multiprog wt and the RTU. The debugging option is 'disabled' again after a
restart of the RTU, and must be 'enabled' again.

– RIO protocol logging:

If this feature is enabled RIO protocol logging function together with the Comprotware CPTT
tool can be used.

Summary of Contents for RTU500 series



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands