manualshive.com logo in svg

ABB RTU500 series, User Manual

Share
Download
ABB RTU500 series User Manual Download Page 24

Management

RTU500 series Remote Terminal Unit

User Management

2-14 | 1KGT 150 924

 

V000 1 - ABB AG

Permission Definition

Description

enableTest@ABBRTU500

Enabling and use simulation and test mode:
– Enable/Disable RTU500 series test mode via the Web server. The test mode al-

lows the simulation of inputs/outputs in the test manager of the Web server.

– Enable/Disable time administration test mode to allow setting of the RTU system

time via the Web server.

– Enable/Disable IEC 61850 startup logging (via Web server).
– Enable/Disable Ethernet and PPP interface logging (via Web server).
– Enable/Disable IEC 61850 debug trace interface (via Web server).
– Enable/Disable VxWorks debug interface (via Web server).
– Simulate inputs, outputs, system events and security events in the RTU500 series

test mode via the Web server (If test mode is enabled).

– Set system time of RTU via Web server, if time administration test mode is en-

abled.

enablePlc@ABBRTU500

Enable and use PLC online debug mode:
– Enable/Disable PLC online debug mode via the Web server. Once enabled there

is no restriction on the access to the PLC. That means the real access is not pro-
tected by user name and password. The PLC debug mode is disabled after a fix
timeout of 30 minutes if no online connection exists.

onlineConf@ABBRTU500

Online configuration changes:
– Online configuration changes (Engineering via the RTU500 web server)

onlinePara@ABBRTU500

Online parameter changes:
– Online parameter changes (Engineering via the RTU500 web server)

viewDataHmi@ABBRTU500

Read and view data on the Integrated HMI:
– View all configured Integrated HMI pages.
– View and download process archive information in the HMI event list (events and

indications, measured values and integrated total).

– Acknowledge alarms in the HMI alarm list.

ctrlOpHmi@ABBRTU500

Control operations on the Integrated HMI:
– View all configured Integrated HMI pages.
– View and download process archive information in the HMI event list (events and

indications, measured values and integrated total).

– Acknowledge alarms in the HMI alarm list.
– Do control operations in the Integrated HMI

Table 5: Account permissions available in the RTU

2.5.4

Change own user password

The Administrator can change the passwords of all user accounts. A normal user can change the
own password, only. To change the own password the user must select the tab "User Accounts"
in the user account management. In this case the user account table shows the logged in user and
the password can be changed by selecting the lock symbol. The new password is checked against
the policies rules and set when the button "Ok" is selected. By pressing the button "Cancel" the
password is not changed and the old password is still valid. The following figure shows the user
interface for changing the own password.

Summary of Contents for RTU500 series



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands