manualshive.com logo in svg

ABB RTU500 series, User Manual

Share
Download
ABB RTU500 series User Manual Download Page 23

RTU500 series Remote Terminal Unit

Management

User Management

ABB AG - 1KGT 150 924

 

V000 1 | 2-13

Permission Definition

Description

viewData@ABBRTU500

Read and view RTU data:
– View system diagnosis log in Web server.
– View and download system diagnosis file in Web server.
– View RTU500 series process data in hardware tree of Web server.
– Enable and disable RIO protocol logging mode in the Web server. Once enabled

there is no restriction on the access to the RIO server. That means the real access
is not protected by user name and password. The RIO protocol logging mode is
disabled after a fix timeout of 30 minutes if no online connection exists.

– View and download process archive information via the Web server (events and in-

dications, measured values and integrated total).

– Download archived disturbance record files via the Web server.
– View online parameter changes in the engineering part of the Web server.
– View online configuration in the engineering part of the Web server.

config@ABBRTU500

Change configuration files:
– Upload and download all RTU500 series configuration files via the Web server.

This comprises the RTU configuration and the Integrated HMI configuration.

– Restart of RTU500 series via RTU500 series Web server.

firmware@ABBRTU500

Change firmware files:
– Upload and download all RTU500 series firmware files via the Web server. This

comprises the RTU basic firmware, the communication controller firmware and the
Integrated HMI firmware.

– Restart of RTU500 series via RTU500 series Web server.
– View, upgrade and extend RTU500 series protocol/function licences (via Web

server).

account@ABBRTU500

User account management:
– Add, modify and delete user accounts (via Web server).
– Add, modify and delete user roles (via Web server).
– Assign and withdraw user accounts to user roles (via Web server).
– Assign and withdraw account permissions to user roles (via Web server).
– Change user passwords (via Web server).
– Upload and download password files (via Web server).
– Prohibit RIO protocol logging mode (via Web server).
– Prohibit PLC online debug mode (via Web server).
– Prohibit RTU500 series test mode (via Web server).
– Prohibit online configuration changes (via Web server).
– Prohibit online parameter changes (via Web server).

userRole@ABBRTU500

User role management:
– Assign and withdraw user accounts to user roles (via Web server).
– Assign and withdraw account permissions to user roles (via Web server).
– Change user passwords (via Web server).

viewEvent@ABBRTU500

View security event logging / audit trails:
– View logged security events in Web server.
– Download logged security events in predefined CSV format (via Web server).

Table 5: Account permissions available in the RTU

Summary of Contents for RTU500 series



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands