ABB REU 610, Technical Reference Manual

Page: 94 / 140

Table 5.1.17.-3 Recorded data: Channels 1...5 (Continued)
Recorded data Event (R) Value
n Channel 1 n-1 Channel 2 n-2 Channel 3 n-3 Channel 4 n-4 Channel 5
Pickup duration of
element 59N-2 1V15 2V15 3V15 4V15 5V15 0
…
100%
Pickup duration of
external trip 1V16 2V16 3V16 4V16 5V16 0/100%
Time stamp of the
recorded data, date 1V17 2V17 3V17 4V17 5V17 YY-MM-DD
Time stamp of the
recorded data, time 1V18 2V18 3V18 4V18 5V18 HH.MM;SS.sss
a)
If is not based on negative phase-sequence voltage U
2
, dashes are shown on the LCD and "999" when read via serial
communication.
b)
If is not based on positive phase-sequence voltage U
1
, dashes are shown on the LCD and "999" when read via serial communication.
Disturbance recorder
Table 5.1.17.-4 Parameters for the disturbance recorder
Description Parameter (channel 0) R, W Value
Remote triggering M1
a)
W 1
Clear recorder memory M2 W 1
Sampling rate M15
b)
R, W 800/960 Hz
400/480 Hz
50/60 Hz
Station identification/unit number M18 R, W 0...9999
Rated frequency M19 R 50 or 60 Hz
Name of the station M20 R, W Max 16 characters
Digital channel texts M40...M47 R -
Analog channel texts M60...M63 R -
Analog channel conversion factor and unit
for primary voltage transformer(s) M80
c)d)
R, W Factor 0.00...600, unit
(V, kV), e.g. 20.0,kV
M81 and R
M82 R
Analog channel conversion factor and unit
for residual voltage U
n
M83
c)
R, W Factor 0.00...600, unit
(V, kV), e.g. 20.0,kV
Internal trigger signals' checksum V236 R, W 0...4095
Internal trigger signal's edge V237 R, W 0...4095
Checksum of internal signal storing mask V238
b)
R, W 0...4095
Post-triggering recording length V240 R, W 0...100%
External trigger signal's checksum V241 R, W 0...31
94
REU 610
Voltage Relay
Technical Reference Manual - ANSI Version
1MRS755972