ABB RER601 Technical Manual Download Page 42

Page: 42 / 108

GUID-482933B5-9687-4B59-B052-C41E450E7EE5 V1 EN

Figure 23:

DynDNS client settings

DynDNS service client enabled

disables or enables the DNS name update.

DynDNS service provider

determines the service provider. Only dyndsn.org is

currently supported.

DynDNS Hostname

determines the service provider account host name.

DynDNS Username

determines the service provider user name.

DynDNS Password

determines the service provider password.

5.4.8.5

NTP client

The NTP client settings can be used to update the real-time clock of the device
using the NTP protocol.

NTP server

When enabled, the device updates the system clock from the NTP server.

Query interval

determines the time interval for an NTP query.

Minimum time difference (seconds)

determines the minimum time difference when

the clock is updated.

Maximum time difference

determines the maximum time difference between local

system time and NTP time when the clock is updated.

Time adjust mode

adds or subtracts time from the received NTP value.

Section 5

1MRS757105 B

RER601/603 Configurator

RER601/603

Technical Manual

Summary of Contents for RER601












































































































Search results

Summary of Contents for RER601

Reviews:

Related manuals for RER601

Brands by name

Popular brands

ABB RER601, Technical Manual

Search results

Summary of Contents for RER601

Reviews:

Related manuals for RER601

Brands by name

Popular brands