recommends a sequence for engineering of protection and control functions, LHMI
functions as well as communication engineering for IEC 61850 and other
supported protocols.
The installation manual contains instructions on how to install the IED. The
manual provides procedures for mechanical and electrical installation. The chapters
are organized in chronological order in which the IED should be installed.
The operation manual contains instructions on how to operate the IED once it has
been commissioned. The manual provides instructions for monitoring, controlling
and setting the IED. The manual also describes how to identify disturbances and
how to view calculated and measured power grid data to determine the cause of a
fault.
The point list manual describes the outlook and properties of the data points
specific to the IED. The manual should be used in conjunction with the
corresponding communication protocol manual.
The technical manual contains application and functionality descriptions and lists
function blocks, logic diagrams, input and output signals, setting parameters and
technical data sorted per function. The manual can be used as a technical reference
during the engineering phase, installation and commissioning phase, and during
normal service.
1.3.2
Document revision history
Document revision/date
Product version
History
A/2013-05-07
2.0
First release
Download the latest documents from the ABB Website
http://www.abb.com/substationautomation
.
1.3.3
Related documentation
Name of the document
Document ID
DNP3 Communication Protocol Manual
1MRS757646
1.4
Symbols and conventions
1.4.1
Symbols
The caution icon indicates important information or warning related
to the concept discussed in the text. It might indicate the presence
Section 1
1MRS757656 A
Introduction
8
REM620
Point List Manual
