Place
Busbar Junctions
into
display page
Select
Busbar Junction
symbol and use
Rotate
command from toolbar to get
the busbar end to the margin
GUID-A58439A5-575C-4EED-A5A9-77FDECAA9D21 V1 EN
Figure 54:
Graphical Display Editor: drawing a busbar and placing busbar
junctions
3.
Add a link between one
Busbar Junction
point and the corresponding symbol or
junction point.
6.1.1.10
Adding symbols into a display page
1.
Prepare the body of the single-line diagram by locating symbols to the wanted
positions on the display.
2.
Drag the apparatus or transformer symbols into a raster box.
3.
Drag the connection symbols into a raster box.
4.
Place the junction points.
Do not connect two symbols directly to each other. Instead, add a junction
between them.
5.
Use the X and Y coordinates in the
Object Properties
window to adjust the
placement of symbols in the single-line diagram.
1MRS240044-IB A
Section 6
LHMI engineering
REF615R
91
Engineering Manual
