The application manual contains application descriptions and setting guidelines sorted per function.
The manual can be used to find out when and for what purpose a typical protection function can be
used. The manual can also provide assistance for calculating settings.
The technical manual contains operation principle descriptions, and lists function blocks, logic
diagrams, input and output signals, setting parameters and technical data, sorted per function. The
manual can be used as a technical reference during the engineering phase, installation and
commissioning phase, and during normal service.
The communication protocol manual describes the communication protocols supported by the IED.
The manual concentrates on the vendor-specific implementations.
The point list manual describes the outlook and properties of the data points specific to the IED. The
manual should be used in conjunction with the corresponding communication protocol manual.
The cyber security deployment guideline describes the process for handling cyber security when
communicating with the IED. Certification, Authorization with role based access control, and product
engineering for cyber security related events are described and sorted by function. The guideline can
be used as a technical reference during the engineering phase, installation and commissioning
phase, and during normal service.
1.3.2
Document revision history
GUID-34B323E4-1319-4D42-80CE-29B0F2D36E2C v5
Document
revision
Date
Product version
History
-
2017-05
First release for product version 2.2
A
2017-10
Ethernet ports with RJ45 connector added.
B
2018-03
Document enhancements and corrections
C
2018–06
LDCM galvanic X.21 and TRM with ringlugs added. Functions
ZRCPDIS, DELVSPVC, DELSPVC, DELISPVC, CHMMHAN
and VHMMHAN added. Functions ZRWPDIS, RWRFLO
updated. Ordering section updated.
D
2018-11
Updates/enhancements made to ZGTPDIS, ZRCPDIS,
T1PPDIF, DELVSPVC, REALCOMP and FNKEYMDx.
Ordering section updated.
E
2019-05
PTP enhancements and corrections
F
Document not released
G
Document not released
H
Document not released
J
2020-09
Functions IEC 61850SIM and ALGOS added. Updates/
enhancements made to ZRWPDIS, TPPIOC, SAPTUF,
SAPTUF, SSIMG, SSIML and SMPPTRC.
K
2021-06
2.2.5
Function FLTMMXU, HOLDMINMAX, INT_REAL,
CONST_INT, INTSEL, LIMITER, ABS, POL_REC, RAD_DEG,
CONST_REAL, REALSEL, STOREINT, STOREREAL,
DEG_RAD and RSTP added. Updates/enhancements made
to BRPTOC, O2RWPTOV, U2RWPTUV, VHMMHAN,
CHMMHAN, RWRFLO, D2PTOC, EF2PTOC and DRPRDRE.
1MRK 506 377-UEN Rev. K
Section 1
Introduction
Railway application RER670
11
Commissioning manual
© 2017 - 2021 Hitachi Power Grids. All rights reserved
