•
ACT to program the application function block for apparatus and/or
measurements.
•
PST to adapt the settings and/or configuration parameter of the application
function block.
•
GDE to establish the link for updating the selected data attribute in the HMI of the
application function block.
Different application function blocks are used to deliver the needed information.
•
Switch controller (of type CSWI) for an apparatus.
•
All configured function blocks with measurements (of type MMXU) for the
measurements.
•
VSGGIO for one bit indications for the dynamic text symbols.
•
SLGGGIO for 32 bit indications for the dynamic text symbols.
1.
Right-click the apparatus symbol and select
Select Input Signal
. A list of
engineered switch control application function blocks opens, see
.
2.
Select the switch control application function block that corresponds to the
selected apparatus.
3.
Right-click the measurement symbol and select
Select Input Signal
. A list of
the engineered measurement application function blocks opens.
4.
Select the measurement application function block that corresponds to the
selected symbol.
Section 6
1MRS756800 F
Local HMI engineering
98
630 series
Engineering Manual
