4.2
Using the Web HMI
WHMI is disabled by default.
1.
To enable the WHMI, select
Main menu/Configuration/HMI/Web HMI/
Operation
via the LHMI.
2.
To enable writing through the WHMI, select
Main menu/
Configuration/HMI/Web HMI/Write mode
via the LHMI.
3.
To open the WHMI, write the IED IP address to the address bar of the
browser.
Do not use favorites in the web browser. If the user is unauthorized
and selects a favorite pointing to a WHMI page, the action can redirect
the user to the log in page. With authorization the user is redirected to
the startup page.
4.2.1
Logging in
If no users have been created with PCM600, both the default user ID and password is
SuperUser.
1.
Enter the username.
2.
Enter the password.
3.
Click
OK
.
A071238 V3 EN
Figure 29:
Entering username and password to use the WHMI
1MRS756509 E
Section 4
Using the HMI
630 series
47
Operation Manual
