•
Abbreviations and acronyms are spelled out in the glossary. The glossary also
contains definitions of important terms.
•
Push button navigation in the LHMI menu structure is presented by using the
push button icons.
To navigate between the options, use
and
.
•
Menu paths are presented in bold.
Select
Main menu/Settings
.
•
WHMI menu names are presented in bold.
Click
Information
in the WHMI menu structure.
•
LHMI messages are shown in Courier font.
To save the changes in nonvolatile memory, select
Yes
and press
.
•
Parameter names are shown in italics.
The function can be enabled and disabled with the
Operation
setting.
•
The ^ character in front of an input or output signal name in the function block
symbol given for a function, indicates that the user can set an own signal name in
PCM600.
•
The * character after an input or output signal name in the function block symbol
given for a function, indicates that the signal must be connected to another
function block in the application configuration to achieve a valid application
configuration.
1.4.3
Functions, codes and symbols
Table 1:
Functions included in the IEDs
Description
IEC 61850
IEC 60617
ANSI
Protection
Three-phase non-directional
overcurrent protection, low stage
PHLPTOC
3I>
51P-1
Three-phase non-directional
overcurrent protection, high stage
PHHPTOC
3I>>
51P-2
Three-phase non-directional
overcurrent protection,
instantaneous stage
PHIPTOC
3I>>>
50P/51P
Voltage dependent overcurrent
protection
PHPVOC
I(U)>
51V
Three-phase directional
overcurrent protection, low stage
DPHLPDOC
3I> ->
67-1
Three-phase directional
overcurrent protection, high stage
DPHHPDOC
3I>> ->
67-2
Distance protection
DSTPDIS
Z<
21, 21P, 21N
Automatic switch-onto-fault logic
CVRSOF
SOTF
SOTF
Fault locator
SCEFRFLO
FLOC
21FL
Autoreclosing
DARREC
O -> I
79
Non-directional earth-fault
protection, low stage
EFLPTOC
I0>
51N-1
Table continues on next page
Section 1
1MRS756509 E
Introduction
8
630 series
Operation Manual
