manualshive.com logo in svg

ABB REF615 ANSI 5.0 FP1, Product Manual

Share
Download
ABB REF615 ANSI 5.0 FP1 Product Manual Download Page 68

26. Tools

The protection relay is delivered as a preconfigured 
unit. The default parameter setting values can be 
changed from the frontpanel user interface (local 
HMI), the Web browser-based user interface (Web 
HMI) or Protection and Control IED Manager 
PCM600 in combination with the relay-specific con-
nectivity package.

PCM600 offers extensive relay configuration func-
tions. For example, depending on the protection 
relay, the relay signals, application, graphical dis-
play and single-line diagram, and IEC 61850 com-

munication, including horizontal GOOSE communi

-

cation, can be modified with PCM600.

When the Web HMI is used, the protection relay can 
be accessed either locally or remotely using a Web 
browser (Internet Explorer). For security reasons, 
the Web HMI is disabled by default but it can be en-
abled via the local HMI. The Web HMI functionality 
can be limited to read-only access. 

The relay connectivity package is a collection of 
software and specific relay information, which en-
ables system products and tools to connect and in-
teract with the protection relay. The connectivity 
packages reduce the risk of errors in system inte-
gration, minimizing device configuration and setup 
times. Further, the connectivity packages for pro-
tection relays of this product series include a flexi-
ble update tool for adding one additional local HMI 
language to the protection relay. The update tool is 
activated using PCM600, and it enables multiple 
updates of the additional HMI language, thus offer-
ing flexible means for possible future language up-
dates.

68

R E F61 5 A N S I 5.0 FP1 

FEED ER  P R OT EC T I O N  A N D  CO N T R O L

—

Table 117. Tools

Description

Version

PCM600

2.8 or later

Web browser

IE 10.0 or IE 11.0

REF615 Connectivity Package

5.1 or later

Summary of Contents for REF615 ANSI 5.0 FP1

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands