manualshive.com logo in svg

ABB REC 523, Technical Reference Manual

Share
Download
ABB REC 523 Technical Reference Manual Download Page 77

1MRS750881-MUM

REC 523

77

Remote Monitoring and Control Unit

 

Technical Reference Manual

8. 

Service

When the REC 523 device is used under the conditions specified in Section 
7.1.Technical data, it is practically maintenance-free. The REC 523 electronics 
include no parts or components subject to abnormal physical or electrical wear under 
normal operating conditions. 

If the device fails in operation or if the operating values considerably differ from 
those mentioned in the device specifications, the device should be overhauled. All 
repairs are to be taken by the manufacturer. Contact the manufacturer or its nearest 
representative for further information about checking, overhaul and recalibration of 
the device.  

To achieve the best possible operation accuracy, all parts of the 
REC 523 product have been calibrated together.

The REC 523 device that is to be sent to the manufacturer has to be 
carefully packed to prevent further damage to the device.

In the event of malfunction, consult your device supplier.

Summary of Contents for REC 523































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands