Appendix A – Technical data
24
RAIO-01 User’s manual
Analogue inputs:
• Signal types: ±(0)4…20 mA, ±(0)2…10 V, ±0…2 V
• Input impedance: 100
Ω
(current), 200 k
Ω
(voltage)
• Resolution in unipolar mode: 0.024% (12 data bits)
• Resolution in bipolar mode: 0.048% (11 data bits +
sign)
• Inaccuracy:
±
0.5% (Full Scale Range) at 25
°
C
Temperature coefficient:
±
100 ppm/
°
C max.
• Isolated from the analogue outputs and the module
carrier board. The maximum continuous isolation
voltage is 48 V rms; the maximum peak value is
100 V. The isolation towards the chassis potential
(e.g. GND and +24 VDC of the module carrier board)
has been tested at 1.5 kV AC for 1 s.
• Common mode voltage:
±
15 V max.
• HW filtering: 2 ms approx.
Analogue outputs:
• Signal type: 0(4)...20 mA
• Load resistance max.: 700
Ω
• Resolution: 0.024% (12 bits)
• Inaccuracy:
±
0.5% (Full Scale Range) at 25
°
C
Temperature coefficient:
±
100 ppm/
°
C max.
• Isolated from the analogue inputs and the module
carrier board. The maximum continuous isolation
voltage is 48 V rms; the maximum peak value is
100 V. The isolation towards the chassis potential
(e.g. GND and +24 VDC of the module carrier board)
has been tested at 1.5 kV AC for 1 s.
Summary of Contents for RAIO-01
