manualshive.com logo in svg

ABB PST, Installation And Maintenance Manual

Share
Download
ABB PST Installation And Maintenance Manual Download Page 91

Low Voltage Products & Systems

          91

ABB Inc. • 888-385-1221 • www.abb-control.com

                   AC 1006.9 - 5/03

Chapter 7 - Settings and configuration

Second sequence parameters (2nd Seq .Param.)

To set parameters related to the second sequence, enter the
2nd Seq. Param. group.
The following parameters can be adjusted:

2nd Set Ie

Setting current.

Start Ramp2 Ramp time for start.

Init Volt2

Initial voltage.

Curr Lim2

 Current limit.

Press 

Store to save the selected parameter.

Third sequence parameters (3rd Seq .Param.)

To set parameters related to the third sequence, enter the
3rd Seq. Param. group.
The following parameters can be adjusted:

3rd Set Ie

Setting current.

Start Ramp3  Ramp time for start.

Init Volt3

Initial voltage.

Curr Lim3

Current limit.

Press 

Store to save the selected parameter.

Summary of Contents for PST





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands